Wilson & Son General Contractors in Baltimore: Residential Renovation and Additions

Wilson & Son General Contractors is a Baltimore-based firm handling kitchen and bathroom renovations, room additions, and foundation repair for single-family homes and small multifamily properties. The company operates as a licensed, bonded general contractor serving Baltimore County and the city proper, positioning itself in the middle tier of Baltimore's residential construction market: larger than solo handymen but smaller than regional firms that manage 50-unit commercial developments.

What the work actually covers

The company takes on interior and exterior projects that require permitting and structural oversight. Kitchen remodels typically run 6 to 10 weeks depending on scope. Bathroom renovations range from cosmetic updates (fixtures, tile, vanity) to full gut jobs with plumbing relocation. Room additions, finished basements, and deck construction fall within scope. The firm also handles foundation repair, including water intrusion remediation and structural cracks, a specialty that matters in older Baltimore neighborhoods where foundation settling is common. They do not do roofing as a primary service and refer those jobs elsewhere.

Pricing and process

A kitchen renovation with new cabinetry, countertops, and appliances typically costs between $35,000 and $65,000 for a standard Baltimore rowhouse; this range reflects material choices and whether walls move. Bathroom remodels run $12,000 to $25,000. The company requires a signed estimate before work begins; estimates are free and include a timeline. A 50 percent deposit is standard at contract signing, with the remainder due upon completion. Change orders are documented in writing and must be signed before work proceeds, which protects both parties when hidden problems emerge (common in Baltimore's pre-1950 housing stock).

How to choose between Wilson & Son and other Baltimore contractors

Baltimore's general contracting market divides roughly into three tiers. At the low end, unlicensed handymen charge $40 to $65 per hour and work on small repairs; they cannot pull permits and do not carry insurance. In the middle sit licensed GCs like Wilson & Son, charging $85 to $120 per labor hour and managing medium-sized projects with full permits and bonding. At the high end, design-build firms and licensed architects bundle design services with construction, adding 20 to 35 percent to final cost but handling concept-to-completion coordination. Choose Wilson & Son if you need a permitted renovation on a fixed timeline and want licensed accountability without architect fees. Choose a handyman only for unpermitted cosmetic work (painting, fixture swaps). Choose a design-build firm if you are starting from concept and need aesthetic guidance alongside construction.

Other licensed Baltimore contractors in this tier include Chesapeake General Contractors and Ryland Homes' remodeling division; Chesapeake focuses heavily on additions and tends to run 10 to 15 percent higher for comparable kitchen work, while Ryland often requires larger minimum projects.

Who this suits and who it does not

This contractor works best for owners of rowhouses, townhouses, and small single-family homes in Baltimore proper or close-in County areas where the firm has existing relationships with inspectors and material suppliers. Owners tackling first-time renovation benefit from the company's standard process and written timelines. Homeowners with tight budgets may find the mid-range pricing tight; a full kitchen under $25,000 would require careful material selection or a handyman approach to non-permitted work. Large-scale gut renovations or properties needing major architectural rethinking are better suited to design-build teams. Properties in distant County suburbs may face longer lead times due to travel.

What the first visit involves

An initial consultation is free. The owner walks the space with a company representative, who photographs existing conditions and notes measurements, existing plumbing runs, and electrical service. Within one week, the company returns with a written estimate, timeline, and scope document. The estimate breaks costs into labor and materials by phase (demo, framing, mechanical, finish). If the owner accepts, a contract is signed, the deposit is paid, and a start date is scheduled. The company typically pulls all required permits; permit costs (usually $200 to $800 depending on project type) are included in the estimate or listed separately.

Hours, location, and logistics

The company operates Monday through Friday, 7 a.m. to 4 p.m., with Saturday availability for site visits by appointment. Work crews typically arrive between 7 and 8 a.m. and depart by 3:30 p.m. on weekdays. The main office is in Dundalk. Parking for work trucks is the owner's responsibility; in rowhouse-dense neighborhoods, the company coordinates with neighbors or uses street permits where available. Most projects start within two to four weeks of contract signing; kitchen and bath work has longer wait times (6 to 12 weeks out) during spring and fall.

Wilson & Son fills a practical gap in Baltimore's renovation market: licensed, bonded work at local-market pricing without the overhead of a regional firm. The company's track record with older home systems and permit navigation makes it a solid choice for owners who want professional execution without design-service markup.